HOM study and parameter calculation of the TESLA cavity model

Get Citation
ZENG Ri-Hua, SCHUH Marcel, GERIGK Frank, WEGNER Rolf, PAN Wei-Min, WANG Guang-Wei and LIU Rong. HOM study and parameter calculation of the TESLA cavity model[J]. Chinese Physics C, 2010, 34(1): 99-102. doi: 10.1088/1674-1137/34/1/018
ZENG Ri-Hua, SCHUH Marcel, GERIGK Frank, WEGNER Rolf, PAN Wei-Min, WANG Guang-Wei and LIU Rong. HOM study and parameter calculation of the TESLA cavity model[J]. Chinese Physics C, 2010, 34(1): 99-102.  doi: 10.1088/1674-1137/34/1/018 shu
Milestone
Received: 2009-02-01
Revised: 2009-02-16
Article Metric

Article Views(2878)
PDF Downloads(623)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

HOM study and parameter calculation of the TESLA cavity model

    Corresponding author: ZENG Ri-Hua,

Abstract: 

The Superconducting Proton Linac (SPL) is the project for a superconducting, high current H- accelerator at CERN. To find dangerous higher order modes (HOMs) in the SPL superconducting cavities, simulation and analysis for the cavity model using simulation tools are necessary. The existing TESLA 9-cell cavity geometry data have been used for the initial construction of the models in HFSS. Monopole, dipole and quadrupole modes have been obtained by applying different symmetry boundaries on various cavity models. In calculation, scripting language in HFSS was used to create scripts to automatically calculate the parameters of modes in these cavity models (these scripts are also available in other cavities with different cell numbers and geometric structures). The results
calculated automatically are then compared with the values given in the TESLA
paper. The optimized cavity model with the minimum error will be taken as the base for further simulation of the SPL cavities.

    HTML

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return