Conception design of helium ion FFAG accelerator with induction accelerating cavity

LUO Huan-Li; XU Yu-Cun; WANG Xiang-Qi; XU Hong-Liang

doi:10.1088/1674-1137/37/9/097001

Chinese Physics C> 2013, Vol. 37> Issue(9) : 097001 DOI: 10.1088/1674-1137/37/9/097001

Conception design of helium ion FFAG accelerator with induction accelerating cavity

Abstract
HTML
Reference
Related

PDF

Abstract：
In the recent decades of particle accelerator R&D area, the fixed field alternating gradient (FFAG) accelerator has become a highlight for some advantages of its higher beam intensity and lower cost, although there are still some technical challenges. In this paper, the FFAG accelerator is adopted to accelerate a helium ion beam on the one hand for the study of helium embrittlement on fusion reactor envelope material and on the other hand for promoting the conception research and design of the FFAG accelerator and exploring the possibility of developing high power FFAG accelerators. The conventional period focusing unit of the helium ion FFAG accelerator and three-dimensional model of the large aperture combinatorial magnet by OPERA-TOSCA are given. For low energy and low revolution frequency, induction acceleration is proposed to replace conventional radio frequency (RF) acceleration for the helium ion FFAG accelerator, which avoids the potential breakdown of the acceleration field caused by the wake field and improves the acceleration repetition frequency to gain higher beam intensity. The main parameters and three-dimensional model of induction cavity are given. Two special constraint waveforms are proposed to refrain from particle accelerating time slip (ΔT) caused by accelerating voltage drop of flat top and energy deviation. The particle longitudinal motion in two waveforms is simulated.

References

[1]

Kaichiro Mishima, Hironobu Unesaki, Tsuyoshi Misawa et al. Nuclear Science and Technology, 2007, 44(3): 499-503[2] Cheol Ho Pyeon, Morgan Hervault, Tsuyoshi Misawa et al. Nuclear Science and Technology, 2008, 45(11): 1171-1182[3] Tanigaki M, Takamiya K, Yoshino H et al. Nuclear Instruments and Methods in Physics Research A, 2010, 612: 354-359[4] Koji Yoshimura. Nuclear Instruments and Methods in Physics Research A, 2003, 503: 254-257[5] Meot F. Nuclear Physics B (Proc. Suppl.), 2006, 155: 79-83[6] Geer S, Zisman M S. Progress in Particle and Nuclear Physics, 2007, 59: 631-693[7] Muramatsu M, Kitagawa A, Sato Y et al. Review of Scientific Instruments, 2002, 73(2): 573-575[8] Trbojevic D, Parker B. Physical Review Special Topics-Accelerators and Beams, 2007, 10: 053503[9] Keil E, Sessler A M, Trbojevic D. Physical Review Special Topics-Accelerators and Beams, 2007, 10: 054701[10] ZHANG Chong-Hong, CHEN Ke-Qin, WANG Yin-Shu et al. Nuclear Physics Review, 2001, 18(1): 50-55[11] Kramer D, Brager H R, Rhodes C G et al. Journal of Nuclear Materials, 1968, 25(2): 121-131[12] Ken Takayama, Junichi Kishiro. Nuclear Instruments and Methods in Physics Research A, 2000, 451: 304-317[13] TanujaS.Dixit, TaikiIwashita, KenTakayama. Nuclear Instruments and Methods in Physics Research A, 2009, 602: 326-336[14] Cunningham G S, Morris C. Los Alamos Science, 2003, 28: 76-91[15] SONG Zhi-Zhong, YU Jin-Xiang, GUO Zhi-Yu et al. Nuclear Techniques, 2006, 29(2): 90-92

[1]	Xiao-Mei Zeng , Vasiliy Pelenovich Chuan-Sheng Liu , De-Jun Fu . Design and experimental testing of a gas cluster ion accelerator. Chinese Physics C, 2017, 41(8): 087003. doi: 10.1088/1674-1137/41/8/087003
[2]	Hong-Juan Zheng , Jie Gao , Zhen-Chao Liu . Cavity and HOM coupler design for CEPC. Chinese Physics C, 2016, 40(5): 057001. doi: 10.1088/1674-1137/40/5/057001
[3]	YANG Zi-Qin , LU Xiang-Yang , ZHAO Ji-Fei , QUAN Sheng-Wen , LUO Xing , ZHOU Kui , YANG De-Yu . Electromagnetic design and beam dynamics simulation of a new superconducting accelerating structure for extremely low β protons. Chinese Physics C, 2015, 39(10): 107001. doi: 10.1088/1674-1137/39/10/107001
[4]	HOU Mi , HE Xiang , PEI Shi-Lun , NA Bin , CHI Yun-Long . Accelerating structure design and fabrication for KIPT and PAL XFEL. Chinese Physics C, 2015, 39(5): 057006. doi: 10.1088/1674-1137/39/5/057006
[5]	WANG Yuan , JIANG Xiao-Guo , YANG Guo-Jun , CHEN Si-Fu , ZHANG Zhuo , WEI Tao , LI Jin . Time-resolved energy spectrum measurement of a linear induction accelerator with the magnetic analyzer. Chinese Physics C, 2015, 39(1): 017004. doi: 10.1088/1674-1137/39/1/017004
[6]	XU Meng-Xin , HE Yuan , ZHANG Sheng-Hu , XIA Jia-Wen . Adjusting the accelerating field distribution of a superconducting CH cavity. Chinese Physics C, 2015, 39(5): 057009. doi: 10.1088/1674-1137/39/5/057009
[7]	SHEN Xiao-Kang , CAO Shu-Chun , ZHANG Zi-Min , JING Yi , FENG Yu-Cheng , WANG Hui , ZHAO Hong-Wei , ZHAO Quan-Tang , LIU Ming , LI Zhong-Ping . Experimental investigation of a pulse line ion accelerator in Lanzhou. Chinese Physics C, 2014, 38(11): 117008. doi: 10.1088/1674-1137/38/11/117008
[8]	SHANG Yong , ZHU Kun , CAO Chao , ZHU Jun-Gao , LU Yuan-Rong , GUO Zhi-Yu , CHEN Jia-Er , YAN Xue-Qing . Preliminary design of a laser accelerator beam line. Chinese Physics C, 2014, 38(11): 117011. doi: 10.1088/1674-1137/38/11/117011
[9]	DOU Wei-Ping , HE Yuan , LU Yuan-Rong . Beam dynamics design for uranium drift tube linear accelerator. Chinese Physics C, 2014, 38(7): 077001. doi: 10.1088/1674-1137/38/7/077001
[10]	LIU Zhen-Chao , GAO Jie , LI Zhong-Quan , ZHAI Ji-Yuan , ZHAO Tong-Xian , LI Da-Zhang , LIU Yi-Lin , SUN Yi . ADS 650 MHz medium beta cavity study and design. Chinese Physics C, 2013, 37(1): 017005. doi: 10.1088/1674-1137/37/1/017005
[11]	YUAN Ren-Xian , ZHOU Wei-Min , CHEN Zhi-Chu , YU Lu-Yang , WANG Bao-Pen , LENG Yong-Bin . Design and test of SX-FEL cavity BPM. Chinese Physics C, 2013, 37(11): 118001. doi: 10.1088/1674-1137/37/11/118001
[12]	WANG Bo , ZENG Rong , NIU Ben , SHEN Xiao-Li , SHEN Xiao-Kang , CAO Shu-Chun , ZHANG Zi-Min . E-field measurement of a pulse line ion accelerator. Chinese Physics C, 2013, 37(7): 077003. doi: 10.1088/1674-1137/37/7/077003
[13]	SHEN Xiao-Kang , CAO Shu-Chun , ZHANG Zi-Min , ZHAO Hong-Wei , ZHAO Quan-Tang , LIU Ming , JING Yi , LI Zhong-Ping , WAN Ming , WANG Bin , YANG Chun-Ming , XIAO Rong-Qing , ZHANG Ying-Fa , LI Ji-An . The test pulse line ion accelerator in Lanzhou. Chinese Physics C, 2012, 36(3): 241-246. doi: 10.1088/1674-1137/36/3/009
[14]	WANG Yi , LI Qin , JIANG Xiao-Guo . Monte Carlo simulations for 20 MV X-ray spectrum reconstruction of a linear induction accelerator. Chinese Physics C, 2012, 36(9): 861-866. doi: 10.1088/1674-1137/36/9/012
[15]	M. Y&#0 , maz . DTL cavity design and beam dynamics for a TAC linear proton accelerator. Chinese Physics C, 2012, 36(2): 167-172. doi: 10.1088/1674-1137/36/2/012
[16]	XIAO Yong-Chuan , YIN Xue-Jun , MU Zhen-Cheng , FU Shi-Nian . Study on the HOMs coupler design of spoke cavity. Chinese Physics C, 2011, 35(2): 188-192. doi: 10.1088/1674-1137/35/2/016
[17]	ZHANG Meng , GU Qiang . New linear accelerator (Linac) design based on C-band accelerating structures for SXFEL facility. Chinese Physics C, 2011, 35(11): 1066-1069. doi: 10.1088/1674-1137/35/11/016
[18]	BEI Hua , DENG Hai-Xiao , DAI Zhi-Min . Design of EPU oscillator cavity in femtosecond accelerator. Chinese Physics C, 2009, 33(S2): 93-95. doi: 10.1088/1674-1137/33/S2/024
[19]	BEI Hua , LIN Xu-Ling , DAI Zhi-Min . Design of Smith-Purcell emitter in femtosecond accelerator. Chinese Physics C, 2008, 32(12): 1007-1011. doi: 10.1088/1674-1137/32/12/013
[20]	CHEN Lin , XIE Wei-Ping , LI Ming-Yang , HE Ji-Lin , FAN Hui-Ru , ZHANG Bao-Cheng , HE Fei-Si , ZHAO Kui , CHEN Jia-Er , LIU Ke-Xin . Development of high purity niobium used in SRF accelerating cavity. Chinese Physics C, 2008, 32(12): 1003-1006. doi: 10.1088/1674-1137/32/12/012

Access

Get Citation

LUO Huan-Li, XU Yu-Cun, WANG Xiang-Qi and XU Hong-Liang. Conception design of helium ion FFAG accelerator with induction accelerating cavity[J]. Chinese Physics C, 2013, 37(9): 097001. doi: 10.1088/1674-1137/37/9/097001

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2012-10-15
Revised: 1900-01-01

Article Metric

Article Views(2131)
PDF Downloads(305)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Conception design of helium ion FFAG accelerator with induction accelerating cavity

Corresponding author: LUO Huan-Li,

Corresponding author: WANG Xiang-Qi,

Received Date: 2012-10-15

Accepted Date: 1900-01-01

Available Online: 2013-09-05

Abstract: In the recent decades of particle accelerator R&D area, the fixed field alternating gradient (FFAG) accelerator has become a highlight for some advantages of its higher beam intensity and lower cost, although there are still some technical challenges. In this paper, the FFAG accelerator is adopted to accelerate a helium ion beam on the one hand for the study of helium embrittlement on fusion reactor envelope material and on the other hand for promoting the conception research and design of the FFAG accelerator and exploring the possibility of developing high power FFAG accelerators. The conventional period focusing unit of the helium ion FFAG accelerator and three-dimensional model of the large aperture combinatorial magnet by OPERA-TOSCA are given. For low energy and low revolution frequency, induction acceleration is proposed to replace conventional radio frequency (RF) acceleration for the helium ion FFAG accelerator, which avoids the potential breakdown of the acceleration field caused by the wake field and improves the acceleration repetition frequency to gain higher beam intensity. The main parameters and three-dimensional model of induction cavity are given. Two special constraint waveforms are proposed to refrain from particle accelerating time slip (ΔT) caused by accelerating voltage drop of flat top and energy deviation. The particle longitudinal motion in two waveforms is simulated.

HTML

Reference (1)

Conception design of helium ion FFAG accelerator with induction accelerating cavity

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article