-
Abstract:
It is very important to predict the coupling between the cavity and the high power input source in the coupler design. In this paper, the time domain method is used to calculate the external quality factor for the BEPCII superconducting cavity. A comparison between the simulation results and the experimental results is presented for the different antenna penetration depths of the coupler. The results of simulation and measurement of have a good agreement, and the error is about 10%. The geometry parameters related with are also studied.
-
-
References
[1]
|
. Hasan Padamsee, Jens Knobloch, Tom Hays. RF Superconductivity for Accelerators. New York: John Wiley Sons,INC, 1998. 147-3892. LI De-Run et al. Calculations of External Coupling to a Single Cell RF Cavity. Proceedings of LINAC1998. 9773. SHI Jia-Ru, CHEN Huai-Bi, ZHENG Shu-Xin et al. Comparison of Measured and Calculate Coupling between a Waveguide and an RF Cavity Using CST Microwave Studio. Proceedings of EPAC 2006. 1328-1330 |
-
[1] |
HUANG Wen-Xue
, WANG Yue
, ZHU Zhi-Chao
, TIAN Yu-Lin
, XU Hu-Shan
, SUN Zhi-Yu
, XIAO Guo-Qing
, ZHAN Wen-Long
. Experimental Study of the High-Voltage Breakdown and Simulations for the RFQ Cooler and Buncher RFQ1L. Chinese Physics C,
2006, 30(S2): 261-264. |
[2] |
Xu Jianming
. Matching Problem of Lattice with Transverse Coupling. Chinese Physics C,
1995, 19(1): 73-81. |
[3] |
WANG Man
, LI Jin
, CUI Xiang-Zong
, XIA Xiao-Mi
, LAI Yuan-Fen
, YAO Xiao-Guang
. PROTOTYPE OF END CAP SHOWER COUNTERAND ITS BEAM TEST. Chinese Physics C,
1987, 11(3): 321-326. |
-
Access
-
-