200 MW S-band traveling wave resonant ring development at IHEP

ZHOU Zu-Sheng; CHI Yun-Long; GU Meng-Ping; PEI Guo-Xi

doi:10.1088/1674-1137/34/3/019

Chinese Physics C> 2010, Vol. 34> Issue(3) : 402-404 DOI: 10.1088/1674-1137/34/3/019

200 MW S-band traveling wave resonant ring development at IHEP

Abstract
HTML
Reference
Related

PDF

Abstract：
The resonant-ring is a traveling wave circuit, which is used to produce high peak power with comparatively smaller stored energy. The application to be
considered is its use as a high power simulator mainly for testing the klystron ceramic output window, as well as for high power microwave transmission devices. This paper describes the principle of a resonant ring and introduces the structure and property of the newly constructed traveling wave resonant ring at IHEP. Our goal is to produce a 200 MW class resonant ring at 2.856 GHz with a pulse length of 2 μs and repetition rate of 25 Hz. The installation, commissioning and testing of the ring have been completed and a peak power of 200 MW at 3 μs has been achieved. The conditioning results show that all the parameters of the resonant ring reach the design goals.

References

[1]

. JIN K, Holtkamp N. Journal of University of Science and Technology of China, 2000, 30(2): 169-1732. GU M P, LIU J F et al. S-Band Traveling Wave Resonant Ring. 6th Chinese Institute of Vacuum Electronic. 1986 (in Chinese)3. ZHOU Z S, DONG D et al. Atomic Energy Science and Technology, 2008, 42(5): 396-399 (in Chinese)4. Tischer F J. IRE Transactions PGMTT, 1957. MTT 5(1):51-565. Montgomery C G, Dicke R H et al. M.I.T. Rad. Lab. Series,1948, l8: 1496. Miller S J. The Microwave Journal, 1960, 50-58

[1]	Ayan Banerjee , Indrani Karar , Javlon Rayimbaev , Inomjon Ibragimov , Sardor Murodov , Sokhibjan Muminov , Sardor Jumaniyozov . Existence of quark stars in gravity's Rainbow: the significance of strongly interacting quark matter. Chinese Physics C, 2026, 50(2): 1-12.
[2]	Muhammad Farhan Taseer , Subhash Singha . Impact of particle production mechanisms on pseudorapidity distribution and directed flow in Au+Au and Cu+Cu collisions at ${ \sqrt{{\boldsymbol s}_{\boldsymbol{ NN}}}}$ = 19.6 GeV using AMPT model. Chinese Physics C, 2025, 49(10): 104101. doi: 10.1088/1674-1137/ade660
[3]	Hao Yang , Zhi-Qing Zhang , You-Ya Yang , Peng Li . $ D^*_{(s)}\to P $ form factors and their applications to semi-leptonic and non-leptonic weak decays. Chinese Physics C, 2025, 49(12): 123104. doi: 10.1088/1674-1137/adfb5d
[4]	Yingjie Fan , Xuewen Liu , Ning Zhou . Characterizing the CJPL’s site-specific neutrino floor as the neutrino fog boundary. Chinese Physics C, 2025, 49(10): 103001. doi: 10.1088/1674-1137/ade65e
[5]	Shi-Qi Ling , Zhao-Huan Yu . Imprints of an early matter-dominated era arising from dark matter dilution mechanism on cosmic string dynamics and gravitational wave signatures. Chinese Physics C, 2025, 49(10): 105105. doi: 10.1088/1674-1137/addcd6
[6]	Manpreet Kaur , Sushil Kumar , Sukhjeet Singh , A. K. Jain . Signature splitting in three-quasineutron rotational band 3/2[521]_ν$\otimes $1/2[660]_ν$\otimes $1/2[660]_νof ¹⁵⁵Dy. Chinese Physics C, 2025, 49(10): 104103. doi: 10.1088/1674-1137/ade95e
[7]	Che-Hao Liu , Van Que Tran , Qiaoyi Wen , Fanrong Xu , Tzu-Chiang Yuan . New contributions to b → sγ in the minimal G2HDM. Chinese Physics C, 2025, 49(8): 083107. doi: 10.1088/1674-1137/add873
[8]	Yangfan Guo , Zhou Yan , Xiaofei Yang , Shaojie Chen , Wencong Mei , Hanrui Hu , Yinshen Liu , Dongyang Chen , Chen Zhang , Tianxu Gao , Yipin Jing , Yanlin Ye . Development of cesium laser resonance ionization schemes for PLASEN experiment. Chinese Physics C, 2025, 49(12): 124002. doi: 10.1088/1674-1137/adf49e
[9]	ZHANG Cong , HE Yuan , ZHAO Hong-Wei , ZHANG Sheng-Hu . Multipacting simulation and analysis of a taper quarter wave cavity by using Analyst-PT3P. Chinese Physics C, 2012, 36(4): 362-366. doi: 10.1088/1674-1137/36/4/012
[10]	GUO Yan-Qing , SONG Jie . Quantitative conditions for the formation of p-wave neutron halos. Chinese Physics C, 2011, 35(2): 158-162. doi: 10.1088/1674-1137/35/2/010
[11]	YANG Hong-Xun (for the BESⅡ collaboration) . Partial wave analysis of J/ψ→ppπ⁰ and measurement of J/ψ→ppη, ppη´. Chinese Physics C, 2009, 33(12): 1331-1335. doi: 10.1088/1674-1137/33/12/048
[12]	SHEN Shui-Fa , YU Xiao-Han . Decay of ⁸³Sr and Discussion of Its Daughter's Band Structures. Chinese Physics C, 2004, 28(S1): 78-80.

Access

Get Citation

ZHOU Zu-Sheng, CHI Yun-Long, GU Meng-Ping and PEI Guo-Xi. 200 MW S-band traveling wave resonant ring development at IHEP[J]. Chinese Physics C, 2010, 34(3): 402-404. doi: 10.1088/1674-1137/34/3/019

ZHOU Zu-Sheng, CHI Yun-Long, GU Meng-Ping and PEI Guo-Xi. 200 MW S-band traveling wave resonant ring development at IHEP[J]. Chinese Physics C, 2010, 34(3): 402-404. doi: 10.1088/1674-1137/34/3/019 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2009-04-10
Revised: 2009-06-04

Article Metric

Article Views(4139)
PDF Downloads(611)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

200 MW S-band traveling wave resonant ring development at IHEP

Corresponding author: ZHOU Zu-Sheng,

Received Date: 2009-04-10
Accepted Date: 2009-06-04
Available Online: 2010-03-05

Abstract:

The resonant-ring is a traveling wave circuit, which is used to produce high peak power with comparatively smaller stored energy. The application to be
considered is its use as a high power simulator mainly for testing the klystron ceramic output window, as well as for high power microwave transmission devices. This paper describes the principle of a resonant ring and introduces the structure and property of the newly constructed traveling wave resonant ring at IHEP. Our goal is to produce a 200 MW class resonant ring at 2.856 GHz with a pulse length of 2 μs and repetition rate of 25 Hz. The installation, commissioning and testing of the ring have been completed and a peak power of 200 MW at 3 μs has been achieved. The conditioning results show that all the parameters of the resonant ring reach the design goals.