Simulation and design of an X-band overmoded input cavity

Yang Wu; Yong-Dong Chen; De-Kui Zhao

doi:10.1088/1674-1137/40/6/067002

Chinese Physics C> 2016, Vol. 40> Issue(6) : 067002 DOI: 10.1088/1674-1137/40/6/067002

Simulation and design of an X-band overmoded input cavity

1.
Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang 621900, China
2.
Sciebce and Technology on High Power Microwave Laboratory, Mianyang 621900, China
3.
Sichuan University of Science and Engineering, Zigong 643000, China

Abstract
HTML
Reference
Related

PDF

Abstract：
The RF input cavity is an important component for velocity-modulating types of microwave device, providing velocity modulation and density modulation. Conventional RF input cavities, however, encounter the problem of power capacity in the high frequency band due to the scaling law of the working frequency and device size. In this paper, an X-band overmoded input cavity is proposed and investigated. A resonant reflector is employed to reflect the microwave and isolate the input cavity from the diode and RF extractor. The resonant property of the overmoded input cavity is proved by simulations and cold tests, with PIC simulation showing that with a beam voltage of 600 kV and current of 7 kA, an input power of 90 kW is sufficient to modulate the beam with a modulation depth of 3%.
- X-band ,
- overmoded input cavity ,
- relativistic klystron amplifier ,
- phase-locked oscillator

References

[1]	M. Friedman, J. Krall, Y. Y. Lau and V. Serlin, J. Appl. Phys., 64:3353(1988)
[2]	G.Caryotakis. Phys. Plasmas, 5:1590(1998)
[3]	Y. Wu, H. Q. Xie, Z. H. Li, Y. J. Zhang and Q. S. Ma., Phys. Plasmas, 20:113102(2013)
[4]	M. Friedman, J. Pasour and D. Smithe, Appl. Phys. Lett., 71:3724(1997)
[5]	R. Z. Xiao, C. H. Chen, X. W. Zhang and J. Sun, J. Appl. Phys., 105:053306(2009)
[6]	R. Z. Xiao, C. H. Chen, J. Sun, X. W. Zhang and L. J. Zhang, Appl. Phys. Lett., 98:101502(2011)
[7]	W. Song, J. Sun, H. Shao, R. Z. Xiao, C. H. Chen and G. Z. Liu, J. Appl. Phys., 111:023302(2012)
[8]	R. Z. Xiao, C. H. Chen, W. Song, X. W. Zhang, J. Shun, Z. M. Song, L. J. Zhang and L. G. Zhang, J. Appl. Phys., 110:013301(2011)
[9]	J. Zhou, D. G. Liu, C. Liao and Z. H. Li, IEEE Trans. Plasma Sci., 37:2002(2009)

[1]	Renli Xu , Chen Wu , Jian Liu , Bin Hong , Jie Peng , Xiong Li , Ruxian Zhu , Zhizhen Zhao , Zhongzhou Ren . Ground-state properties of finite nuclei in relativistic Hartree-Bogoliubov theory with an improved quark mass density-dependent model. Chinese Physics C, 2026, 50(2): 1-12.
[2]	Siyu Tang , Zuman Zhang , Chao Zhang , Liang Zheng , Renzhuo Wan . Investigating the transverse-momentum- and pseudorapidity-dependent flow vector decorrelation in p–Pb collisions with a multi-phase transport model. Chinese Physics C, 2025, 49(12): 124104. doi: 10.1088/1674-1137/adef1b
[3]	Fan Huang , Zu-Cheng Chen , Qing-Guo Huang . Detecting cosmological phase transitions with Taiji: sensitivity analysis and parameter estimation. Chinese Physics C, 2025, 49(10): 105103. doi: 10.1088/1674-1137/ade65f
[4]	Wei-Xi Kong , Ben-Wei Zhang . Fox-Wolfram moment of jet production in relativistic heavy-ion collisions. Chinese Physics C, 2025, 49(9): 094101. doi: 10.1088/1674-1137/add5d8
[5]	Manpreet Kaur , Sushil Kumar , Sukhjeet Singh , A. K. Jain . Signature splitting in three-quasineutron rotational band 3/2[521]_ν$\otimes $1/2[660]_ν$\otimes $1/2[660]_νof ¹⁵⁵Dy. Chinese Physics C, 2025, 49(10): 104103. doi: 10.1088/1674-1137/ade95e
[6]	Mikael Chala , Luis Gil , Zhe Ren . Phase transitions in dimensional reduction up to three loops. Chinese Physics C, 2025, 49(12): 123105. doi: 10.1088/1674-1137/adf322
[7]	ZHANG Zhou-Li , HE Yuan , ZHANG Bin , LI De-Run , SHI Ai-Min , PAN Gang , DU Xiao-Nan , SUN Lie-Peng . Study of influence of radial matcher section end shape on RFQ cavity frequency. Chinese Physics C, 2014, 38(7): 077007. doi: 10.1088/1674-1137/38/7/077007
[8]	ZHANG Cong , HE Yuan , ZHAO Hong-Wei , ZHANG Sheng-Hu . Multipacting simulation and analysis of a taper quarter wave cavity by using Analyst-PT3P. Chinese Physics C, 2012, 36(4): 362-366. doi: 10.1088/1674-1137/36/4/012
[9]	SHEN Shui-Fa , YU Xiao-Han . Decay of ⁸³Sr and Discussion of Its Daughter's Band Structures. Chinese Physics C, 2004, 28(S1): 78-80.

Access

Get Citation

Yang Wu, Yong-Dong Chen and De-Kui Zhao. Simulation and design of an X-band overmoded input cavity[J]. Chinese Physics C, 2016, 40(6): 067002. doi: 10.1088/1674-1137/40/6/067002

Yang Wu, Yong-Dong Chen and De-Kui Zhao. Simulation and design of an X-band overmoded input cavity[J]. Chinese Physics C, 2016, 40(6): 067002. doi: 10.1088/1674-1137/40/6/067002 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2015-05-06

Fund

Supported by Talent Introduction Profect of Sichuan University of Science and Engineering (2013 RC09)

Article Metric

Article Views(2703)
PDF Downloads(36)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Simulation and design of an X-band overmoded input cavity

Corresponding author: Yong-Dong Chen,

1. Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang 621900, China
2. Sciebce and Technology on High Power Microwave Laboratory, Mianyang 621900, China
3. Sichuan University of Science and Engineering, Zigong 643000, China

Received Date: 2015-05-06
Available Online: 2016-06-05

Fund Project: Supported by Talent Introduction Profect of Sichuan University of Science and Engineering (2013 RC09)

Abstract: The RF input cavity is an important component for velocity-modulating types of microwave device, providing velocity modulation and density modulation. Conventional RF input cavities, however, encounter the problem of power capacity in the high frequency band due to the scaling law of the working frequency and device size. In this paper, an X-band overmoded input cavity is proposed and investigated. A resonant reflector is employed to reflect the microwave and isolate the input cavity from the diode and RF extractor. The resonant property of the overmoded input cavity is proved by simulations and cold tests, with PIC simulation showing that with a beam voltage of 600 kV and current of 7 kA, an input power of 90 kW is sufficient to modulate the beam with a modulation depth of 3%.