Design and optimization of resistive anode for a two-dimensional imaging GEM detector

Get Citation
Xu-Dong Ju, Ming-Yi Dong, Yi-Chen Zhao, Chuan-Xing Zhou and Qun Ou-Yang. Design and optimization of resistive anode for a two-dimensional imaging GEM detector[J]. Chinese Physics C, 2016, 40(8): 086004. doi: 10.1088/1674-1137/40/8/086004
Xu-Dong Ju, Ming-Yi Dong, Yi-Chen Zhao, Chuan-Xing Zhou and Qun Ou-Yang. Design and optimization of resistive anode for a two-dimensional imaging GEM detector[J]. Chinese Physics C, 2016, 40(8): 086004.  doi: 10.1088/1674-1137/40/8/086004 shu
Milestone
Received: 2016-02-25
Revised: 2016-03-24
Fund

    Supported by National Natural Science Foundation of China (11375219) and CAS Center for Excellence in Particle Physics (CCEPP)

Article Metric

Article Views(1788)
PDF Downloads(132)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Design and optimization of resistive anode for a two-dimensional imaging GEM detector

    Corresponding author: Xu-Dong Ju,
    Corresponding author: Ming-Yi Dong,
  • 1. State Key Laboratory of Particle Detection and Electronics, Beijing 100049, China
  • 2. Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China
  • 3. University of Chinese Academy of Sciences, Beijing 100049, China
  • 4.  Zhengzhou University, Zhengzhou 450001, China
Fund Project:  Supported by National Natural Science Foundation of China (11375219) and CAS Center for Excellence in Particle Physics (CCEPP)

Abstract: A resistive anode for two-dimensional imaging detectors, which consists of a series of high resistivity pads surrounded by low resistivity strips, can provide good spatial resolution while reducing the number of electronics channels required. The optimization of this kind of anode has been studied by both numerical simulations and experimental tests. It is found that to obtain good detector performance, the resistance ratio of the pads to the strips should be larger than 5, the nonuniformity of the pad surface resistivity should be less than 20\%, a smaller pad width leads to a smaller spatial resolution, and when the pad width is 6 mm, the spatial resolution (σ) can reach about 105 μm. Based on the study results, a 2-D GEM detector prototype with optimized resistive anode is constructed and a good imaging performance is achieved.

    HTML

Reference (13)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return