Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac

ZHOU Zu-Sheng; LIU Bo

Chinese Physics C> 2005, Vol. 29> Issue(12) : 1196-1199

Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac

ZHOU Zu-Sheng ^, ,
LIU Bo

Institute of High Energy Physics,CAS,Beijing 100049,ChinaGraduate University of Chinese Academy of Sciences,Beijing 100049,China

Abstract
HTML
Reference
Related

PDF

Abstract：
The Beijing Electron Positron Collider Upgrade Project (BEPCⅡ) requires its injector linac to upgrade the beam energy and current. Hence the high emission current and low emittance electron gun must be newly designed and fabricated to meet the requirement of high positron beam current.This paper describes the temperature field distribution in the gun and the gun deformation caused by this distribution which is performed by using ANSYS. According to the real complex structure and the energy conversion inside the electron gun, we took conduction as the main energy conversion form after deep consideration and then got the temperature field. The coincidence between the temperature field and the structural deformation is also described. In this paper, the beam optics simulated by EGUN before and after structure deformation is discussed, and the valuable results have been obtained. The test results and simulation results are analyzed and compared.

References

[1]

. BEPCⅡ Design Report—Injector Linac Part: IHEP-BEPCⅡ-SB-03-2. Institute of High Energy Physics, CAS,Nov. 20032. ANSYS Release 7.0. ANSYS, Inc. 20023. Herrmannsfeldt W B. EGUN—An Electron Optics andGun Design Program: SLAC-Report-331. Stanford, Oct.19884. Park S J, Kim S H, Park Y J et al. Fabrication and Test of Pulsed 200-MW Electron Gun for High-Power Klystrons.Proc. of Linac 2002. Gyeongju, Korea, Aug. 20025. LIU Bo, GU M P, CHI Y L et al. HEP NP, 2005, 29(5):507—511(in Chinese)(刘波，顾孟平，池云龙等.高能物理与核物理，2005, 29(5):507-511)

[1]	SUN Qi-Long , LIN Guo-Qiang , DAI Zhi-Min . Preliminary Study of Electron Gun Based on Field Emission of Carbon Nanotubes. Chinese Physics C, 2007, 31(3): 296-299.
[2]	ZHAI Ji-Yuan , TANG Chuan-Xiang , ZHENG Shu-Xin . Experimental Study on the Beam Dynamics of Micro-Pulse Electron Gun. Chinese Physics C, 2006, 30(S1): 99-101.
[3]	ZHAI Ji-Yuan , TANG Chuan-Xiang , ZHENG Shu-Xin , LI Quan-Feng . Multipactor Experiment on a Micro-pulse Electron Gun. Chinese Physics C, 2006, 30(2): 147-150.
[4]	LIU Bo , GU Meng-Ping , WANG Shu-Hong , CHI Yun-Long , YANG Xing-Wang , TIAN Shuang-Min , LIU Wei-Bin , YE Qiang . Experiment and Operation of BEPCⅡ Electron Gun System. Chinese Physics C, 2006, 30(5): 466-469.
[5]	SUN Hong-Bing , PEI Yuan-Ji , XIE Ai-Gen , WANG Rong . The Numerical Algorithm of Secondary Emission Microwave Electron Gun. Chinese Physics C, 2005, 29(1): 95-98.
[6]	BIAN Xiao-Hao , CHEN Huai-Bi , ZHENG Shu-Xin , Derun Li . Simulating and Experiment Investigation of the Coupling Factor for Waveguide Loaded Microwave Electornic Gun. Chinese Physics C, 2005, 29(11): 1091-1094.
[7]	LIU Bo , GU Meng-Ping , CHi-Yun-Long , YANG Xing-Wang , TIAN Shuang-Min . Study on BEPC Experimental Electron Gun System. Chinese Physics C, 2005, 29(5): 507-511.
[8]	HU Yuan , TANG Chuan-Xiang , CHEN Huai-Bi , TONG De-Chun , LIN Yu-Zheng . The Research of Multi-cell Thermionic RF Gun Injector Based on X-band DAW Accelerating Structure. Chinese Physics C, 2005, 29(7): 700-704.
[9]	LIU Sheng-Guang , WANG Ming-Kai , SUN Da-Rui , GU Xiao-Feng . Research on the Synchronization System of Ultrafast Laser and the S-Band Microwave. Chinese Physics C, 2004, 28(12): 1278-1281.
[10]	XIANG Rong , QUAN Sheng-Wen , LIN Lin , DING Yuan-Tao , LU Xiang-Yang , JIAO Fei , WANG Gui-Mei , ZHAO Kui . Research and Fabrication of the Photocathodes for DC-SC Photoinjector. Chinese Physics C, 2004, 28(7): 771-774.
[11]	HE Xiao-Zhong , TANG Chuan-Xiang , HUANG Wen-Hui , LIN Yu-Zheng . Researches on Thermal Emittance of Metal Cathode in Photoinjectors. Chinese Physics C, 2004, 28(9): 1007-1012.
[12]	TANG Chuan-Xiang , JIANG Zhan-Feng , TIAN Kai , WANG Ying , XU Yi-Yong . Simulation of Micro-Pulse Electron Guns. Chinese Physics C, 2003, 27(6): 546-550.
[13]	ZHAO Qiang , LI Yong-Gui . Design Studies of a Photocathode RF Gun for Short-Wavelength FELs. Chinese Physics C, 2001, 25(7): 696-700.
[14]	Chen Pengfei , Zhang Mingchao , Li Xinmin , Wang Yuhong . Research and Design of Electron Gun of Electrocurtain. Chinese Physics C, 1998, 22(6): 564-569.
[15]	Tang Chuanxiang , Lin Yuzheng , Tong Dechun , Wu Yuanming , Wang Youzhi , Zhao Xinqiao , Xie Jialin . B&D of a Multi-cavity RF Gun With Thermionic Cathode for BFEL. Chinese Physics C, 1997, 21(4): 378-383.
[16]	Tang Chuanxiang , Wu Yuanming , Wang Youzhi , Zhao Xinqiao , Lin Yuzheng , Xie Jialin . Experimeotal Study of a Multi - Cavity BF Gun With Thermionic Cathode. Chinese Physics C, 1997, 21(5): 470-474.
[17]	Tang Chuanxiang , Yang Yue , Lin Yuzheng . Simulation of RF Thermionic Gun. Chinese Physics C, 1996, 20(4): 376-384.
[18]	Huang Yongzhang , Wu Gang . An Re-entrant Cavity and Its Cathode Structure for the Thermionic Microwave Gun. Chinese Physics C, 1994, 18(7): 658-663.
[19]	HUANG Yong-Zhang , TENG Ke-Jian , XIE Jia-Lin . Design and Fabrication of Alpha Magnet for an Microwave Electron Gun. Chinese Physics C, 1993, 17(9): 790-795.
[20]	XIE Jia-Lin , GAO Jie , HUANG Yong-Zhang , ZHANG Ren-Shan , WANG You-Zhi . THERMIONIC CATHODE MICROWAVE ELECTRON GUN. Chinese Physics C, 1990, 14(7): 577-584.

Access

Get Citation

ZHOU Zu-Sheng and LIU Bo. Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac[J]. Chinese Physics C, 2005, 29(12): 1196-1199.

ZHOU Zu-Sheng and LIU Bo. Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac[J]. Chinese Physics C, 2005, 29(12): 1196-1199. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2005-04-27
Revised: 1900-01-01

Article Metric

Article Views(3248)
PDF Downloads(737)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac

ZHOU Zu-Sheng ^,
LIU Bo

Corresponding author: ZHOU Zu-Sheng,

Institute of High Energy Physics,CAS,Beijing 100049,ChinaGraduate University of Chinese Academy of Sciences,Beijing 100049,China

Received Date: 2005-04-27
Accepted Date: 1900-01-01
Available Online: 2005-12-05

Abstract: The Beijing Electron Positron Collider Upgrade Project (BEPCⅡ) requires its injector linac to upgrade the beam energy and current. Hence the high emission current and low emittance electron gun must be newly designed and fabricated to meet the requirement of high positron beam current.This paper describes the temperature field distribution in the gun and the gun deformation caused by this distribution which is performed by using ANSYS. According to the real complex structure and the energy conversion inside the electron gun, we took conduction as the main energy conversion form after deep consideration and then got the temperature field. The coincidence between the temperature field and the structural deformation is also described. In this paper, the beam optics simulated by EGUN before and after structure deformation is discussed, and the valuable results have been obtained. The test results and simulation results are analyzed and compared.