A S-BAND HIGH POWER PULSED KLYSTRON USED IN ELECTRON LINEAR ACCELERATORS

  • A S-band high-power pulsed klystron is described in this paper. This klystron operates at 2856 MHz, 250 kV and 200 A. Its measured pulsed power exceeds 15 MW with efficiency higher than 40% and gain greater than 40 db. This tube has been used routinely on a 30 MeV Electron Linear Accelerator with reliable performance.
    In this paper, the design requirements, the design considerations, the measured results and the problems encountered are discussed.
  • 加载中
  • [1] 谢家馨、赵永翔著, 速调管群聚理论, 科学出版社, 1966年.[2] 电子管设计手册编辑委员会编, 大功率速调管设计手册, 第二章, 国防工业出版社, 1979年.[3] R. L. Stringall and J. V. Lebacqz "High Power klystron development at the Stanford linear accelerator center".[4] 冈田武夫等“スソド 25MW ブルスクぅィストロン PV-2014”三菱电机技报, Vol. 41 December, 1967. No. 12 P1511-.[5] A. M. 扎列茨基主编, 李纪译“高压电器的绝缘”机械工业出版社, 1965年.[6] 同[5], 第六章。[7] High power microwave window;, Microwave Tubes-Proceedings of 5th International Congress, 1964.
  • 加载中

Get Citation
DING Yao-Gen, WANG You-Zhi, LIU Tie-Shan and QIAO Yu-Fang. A S-BAND HIGH POWER PULSED KLYSTRON USED IN ELECTRON LINEAR ACCELERATORS[J]. Chinese Physics C, 1983, 7(2): 265-268.
DING Yao-Gen, WANG You-Zhi, LIU Tie-Shan and QIAO Yu-Fang. A S-BAND HIGH POWER PULSED KLYSTRON USED IN ELECTRON LINEAR ACCELERATORS[J]. Chinese Physics C, 1983, 7(2): 265-268. shu
Milestone
Received: 1900-01-01
Revised: 1900-01-01
Article Metric

Article Views(3168)
PDF Downloads(459)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

A S-BAND HIGH POWER PULSED KLYSTRON USED IN ELECTRON LINEAR ACCELERATORS

    Corresponding author: DING Yao-Gen,

Abstract: A S-band high-power pulsed klystron is described in this paper. This klystron operates at 2856 MHz, 250 kV and 200 A. Its measured pulsed power exceeds 15 MW with efficiency higher than 40% and gain greater than 40 db. This tube has been used routinely on a 30 MeV Electron Linear Accelerator with reliable performance.
In this paper, the design requirements, the design considerations, the measured results and the problems encountered are discussed.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return